DelAgua uses cookies to track visits to our website only, no personal information is collected.

Find out more about our cookie policy.

DelAgua Bacteriological Kit No 2
DWT Code: 11241
Supplier Code: BacKitNo2
  • Product Image
  • Contains a Multiparameter Photometer (reagents on request), a Total Dissolved Solids (TDS), Conductivity and pH meter and a Turbidity Meter
  • External battery pack is capable of up to 5 incubation cycles between recharges
  • Designed to provide information about the safety of water in difficult situations or remote areas where laboratory facilities do not exist
  • Pelican case for easy carrying and durability
  • Supplied with consumables for 200 plates
The complete portable water lab. Bespoke digital requirements for over 70 parameters, physical, chemical and biological.
Phone +44 (0) 1672 861 198

The Bacteriological Kit No. 2 was originally put together for UNICEF and is currently being used across the world as a solution to water testing challenges. The kit includes the Oxfam-DelAgua Dual Incubator which was designed for microbiological water monitoring via detection of indicator organisms such as E. coli, cholera, salmonella and other faecal water borne pathogens, and is the most popular portable water testing system in the developing world.

The DelAgua Bacteriological Test Kit No. 2 also contains a Multiparameter Photometer (reagents on request), a Total Dissolved Solids (TDS), Conductivity and pH meter and a Turbidity Meter. The kit is designed for use in the field, but may also be used in a laboratory or other permanent location. The kit can be supplied with a range of accessories that will increase the scope of your water quality monitoring.

The kit will perform the following tests:

Thermotolerant (faecal) Coliform Count & Total Coliform Count: The kit includes a portable, battery-powered incubator (Separate battery pack) capable of making five cycles of incubation without mains electricity, generator or vehicle power. Thermotolerant (faecal) and Total Coliform counts can be obtained within 14 to 18 hours of sampling, (simultaneously via the dual incubator) giving a reliable indication of sanitary risk without need for transport or laboratory facilities.

Turbidity Test: A measure of the amount of suspended matter in a water supply. Suspended material may consume chlorine disinfectants and require treatment before disinfection. There are two options for turbidity measurement. The first is via a simple Jackson Tube (measuring up to 2000 NTU). There is also a portable digital turbidimeter with a 0-1000 NTU range for improved accuracy.

Chlorine & pH Tests: Many emergency water supplies are dosed with chlorine disinfectant to ensure their safety as drinking water. These tests allow rapid assessment of chlorine levels and aid the efficient control of dosing thereby ensuring that enough chlorine is present to safeguard the supply.

Conductivity and TDS: A conductivity meter is provided with this kit. Conductivity provides an indication of contamination e.g. saline intrusion or sewage pollution. In addition, this conductivity meter also measures TDS as an indicator of contamination.

Additional equipment can be included on request to test for chemicals that may be of local importance. The tests that can be done are for: Alkalinity, Aluminium, Ammonia, Boron, Bromide, Calcium Hardness, Chlorine DPD, Colour, Copper, Cyanuric Acid, Fluoride, Hardness, Hydrogen Peroxide, Iron, Magnesium, Manganese, Molybdate, Nitrate, Nitrite, Organophosphate, Ozone, pH, Potassium, Silica, Sulphate, Sulphide, Zinc. Reagents are available on request. Please contact us with your requirements.

 You will need the following items to start testing:

  • Pressure cooker or portable steriliser or access to an autoclave e.g. in a hospital.
  • Methanol (approx 1 ml per test)
  • Distilled water
  • 1 litre measuring cylinder or beaker
  • Clean Cloths
  • Dual Incubator in Pelican Case
  • Chlorine/pH Mini Tester
  • Pocket Water Resistant EC, pH and TDS (LR) Tester
  • Portable Logging Turbidity Meter
  • Multi Parameter Photometer
  • External Battery Pack
  • External Battery Power Lead
  • Connector Leads for Battery Pack
  • Battery Charger
  • Bronze Disc
  • Filter Funnel
  • Sample Cup
  • Fuse
  • Lanyard
  • Recalibration Incubator Lid
  • Incubator Lid without hole
  • Methanol Dispenser
  • O-ring
  • 3 sets of 16 re-useable aluminium petri-dishes with strapped housing
  • Polypropylene Bottles 60ml x 10
  • Silicone Rings
  • Spirit Thermometer
  • Trimmer Tool
  • Turbidity Tube
  • Tweezers
  • Vacuum Pump & Cup
  • Handheld Magnifier
  • Pasteur Pipettes x 10
  • Grease in Bijou Bottle
  • Electronic Timer
  • DelAgua Manual
  • DelAgua Training CD ROM with Videos
  • Aluminium Gasket
  • Membrane Filters & Pads x 200
  • Pad Dispenser
  • Culture Medium 38.1 g tub
  • DPD No.1 Tablets x 250
  • DPD No.3 Tablets x 250
  • Phenol Red Tablets x 250
Additional Information
  • Power: 12 V (internal battery -charger supplied)
  • Capacity: 32 x 47mm petri dishes (2 x 16)
  • Photometer: Over 40 parameters programmed
  • Power: 12 V (internal battery, charger supplied)
  • Dimensions: 34.4 x 14.6 x 29.7cm
  • Battery Pack Dimensions: 25.1 x 17.8 x 15.5 cm
Subscribe to Newsletter Icon Subscribe to the DelAgua Newsletter